e Espanha 
.
QUANTUM MT FLUX 80A 1/10 4WD TRUCK - SILVER
Accessories and Parts:
Necessary Accessories
HPI PLAZMA 11.1V 5300MAH 40C LIPO HARD CASE STICK PACK 58.83WH |
HPI PLAZMA 11.1V 5300MAH 40C LIPO HARD CASE STICK PACK 58.83 |
|
LiPo 11.1V-50C 4000 Hardcase (T-Plug) |
LiPo 11.1V-50C 4000 Hardcase (T-Plug) |
|
LiPo Stick Pack 11.1V-50C 5000 Hardcase (T-Plug) |
LiPo Stick Pack 11.1V-50C 5000 Hardcase (T-Plug) |
|
LiPo Stick Pack 7.4V-50C 4000 Hardcase (T-Plug) |
LiPo Stick Pack 7.4V-50C 4000 Hardcase (T-Plug) |
|
LiPo Stick Pack 7.4V-50C 5000 Hardcase (T-Plug) |
LiPo Stick Pack 7.4V-50C 5000 Hardcase (T-Plug) |
|
Power Tank Lipo 11,1V.-60C 7100 Hardcase (T-Plug) |
Power Tank Lipo 11,1V.-60C 7100 Hardcase (T-Plug) |
|
Power Tank Lipo 11.1V.-60C 6200 Hardcase (T-Plug) |
Power Tank Lipo 11.1V.-60C 6200 Hardcase (T-Plug) |
|
Power Tank Lipo 7,4V.-60C 7100 Hardcase (T-Plug) |
Power Tank Lipo 7,4V.-60C 7100 Hardcase (T-Plug) |
|
Power Tank Lipo 7.4V.-60C 6200 Hardcase (T-Plug) |
Power Tank Lipo 7.4V.-60C 6200 Hardcase (T-Plug) |
|
Carregador APC-1 |
|
|
CARREGADOR LC-1 LiPo |
|
|
Charger Cube 2.0 |
|
|
HPI Reactor 200 Charger (EU 2 Pin)
|
|
|
HPI Reactor 600 Charger 6A (EU 2 Pin)
|
|
|
Absima LiPo Safety Bag
|
|
|
PLAZMA POUCH LIPO SAFE CASE (BLACK)
|
|
Spare Parts
QUANTUM MT FLUX 80A 1/10 4WD TRUCK - SILVER
THE BEST EVER MAVERICK LINE-UP KEEPS GETTING BETTER!
THE MAVERICK QUANTUM MT FLUX 80A
There is no denying the impact the Maverick Quantum family has had on the world of RC bashing! In no time at all the Quantum FLUX trucks have earned a fantastic reputation with fans on a quest to push these vehicles harder, faster, higher and longer! Inspired by all the fun you guys are having - we’ve committed to keep developing and advancing these vehicles as fast as customers keep blasting them!!
The upgraded Maverick Quantum MT FLUX 80A is a rugged 4WD Shaft-Driven, monster truck with a high ground clearance chassis design and high ride height suspension set up for clambering over any terrain! With independent Double Wishbone Suspension, Oil Filled Adjustable Coilover Shocks and Tough Metal 4-Gear Differentials Front & Rear, no amount of dirt or jumps will stand in your way!
Pushing the boundries of quality and performance further than ever before seen with Maverick brand, the whole range of Quantum kits benefit from a new Molded Tub Chassis with Hex Pattern Reinforcement, oversized 2.8" wheel design and an adjustable wheelie bar fitted as standard.
Check out all the upgrades below!!
IN ADDITION TO THE REVISED SUSPENSION ARMS WE'VE ROLLED OUT IN ALL QUANTUM FLUX KITS, WE'VE ALSO NOW UPGRADED THE DRIVESHAFTS, AXLE SHAFTS AND FLUX ESC!!
UPGRADE: #150231 HD Universal Drive Shafts
UPGRADE: #150232 HD Wheel Axle Shafts
UPGRADE #150238 FLX-3S80 FLUX 80A ESC
UNLEASH THE BEAST FOR SOME CRAZY, STUNNING ACTION!
The newly upgraded Quantum FLUX 80A kits come preloaded with the same great MM-3660-BL 3300KV Brushless Motor complete with 5.0mm Shaft powering a tough shaft drivetrain spinning all 4 wheels for awesome 4WD action. While there's a step up in power with the waterproof 80AMP FLX10-3S80 ESC ready to pump up to 80 amps of power to the motor for amazing stunts, colossal top speeds, and wheel-spinning sideways action!
The waterproof ESC, waterproof receiver, water-resistant servo, and covered spur gear mean the fun keeps coming and water or debris won't stand in your way!
REAL STEERING WHEEL CONTROLLER INCLUDED!
Anyone who has used a Maverick RC vehicle before will tell you that the MTX-244 transmitter makes for a fantastic driving experience with great throttle and steering response. When it comes to the Maverick 2.4GHz radio system we cut no corners on quality or feel.
All you need is 4 x AA batteries for the transmitter and a LiPo battery of your choice, upto 3S! Check below for more information.
IT'S SO EASY AND FUN TO DRIVE!
To drive the Quantum MT FLUX, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel – it’s as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger - then release and push away again to go into reverse. It takes seconds to get used to this easy operation, and pretty soon you'll be racing with your friends!
INTRODUCING TREDZ TIRES BY HPI RACING
We're proud to announce the fantastic Quantum range features the first two tires in our new TREDZ range. Fully bespoke with compound, profile and tread patterns that are designed and specified by HPI Racing. Wrapped in high quality, high grip rubber.
Tredz Tires by HPI Racing are also available to purchase to upgrade the look and performance of any RC vehicle with 12mm Hex Hub wheel fittings. Look out for more tires joining the Tredz family soon!
ADJUSTABLE WHEELY BAR AS STANDARD!!
When it comes to stunts, jumps and speedruns we've thought of everything with the Quantum family of vehicles. For the first time under the Maverick brand we've pre-installed this sturdy, adjustable wheely bar across the Quantum range. Now you can bust out the longest wheelies on command! Simply pull the trigger and watch it go!
SUPERIOR SUSPENSION FOR SUPERB HANDLING
Featuring independent double wishbone suspension front and rear, oil filled coilover shocks, pillow ball suspension uprights on all four corners and adjustable steel turnbuckle links, you can drive in any terrain with confidence and complete control.
#150203 MAVERICK QUANTUM MT FLUX 80A 1/10 4WD BRUSHLESS MONSTER TRUCK SILVER / GREEN
ALSO AVAILABLE IN BLUE / ORANGE #150202
FEATURES
- 4WD Shaft Drive
HD Front Universal Drive Shafts & Rear Wheel Axle Shafts - Aluminum Hex Hubs
- 3300KV Brushless Motor with 5.0mm Shaft
- Independent Double Wishbone Suspension
- Oil Filled Adjustable Coilover Shocks
- Pillow Ball Front & Rear Suspension Uprights
- Adjustable Steel Turnbuckle Links
- Tough Metal 4-Gear Differentials Front & Rear
- Gear cover to keep debris away from the spur gear
- Dual Point Bell Crank Steering System With Integrated Servo Saver
- Molded Tub Chassis with Hex Pattern Reinforcement
- High Ground Clearance Chassis Design
- Enclosed Receiver Box Protects from the Elements
- Complete Set of Ball Bearings
- Adjustable Wheelie Bar Included
- Oversized 2.8" Wheel Design
- Standard 12mm Hex Hub Wheel Fitting
- TREDZ High Grip Tires
- 2.4GHz Radio Set with Waterproof Receiver
- 80A Waterproof ESC and Water-Resistant Servo
- 3S LiPo Capable
Specification:
Length: 475mm
Width: 365mm
Height: 200mm
Wheelbase: 285mm
Weight: 2.10kg
Items Required:
4 x AA Batteries fot transmitter
2S or 3S LiPo pack with T-plug - HPI Recommends #160161 2S LiPo or #160163 3S LiPo
feedback Report comment