Accessories and Parts:
Necessary Accessories
|
|
|
|
|
|
|
|
|
|
Greenhorn NiMH Stick Pack 7.2V 3000 |
|
|
Greenhorn NiMH Stick Pack 7.2V 3600 |
|
|
Greenhorn NiMH Stick Pack 7.2V 4200 |
|
|
Greenhorn NiMH Stick Pack 7.2V 5100 |
|
|
|
|
|
Plazma 7.2V 3300mAh NiMH Stick Battery Pack |
|
|
Plazma 7.2V 5000mAh NiMH Stick Battery Pack |
Spare Parts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Steering Connection Plate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Beadlock Wheel Set128x65mm - Red |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diff.l Crown Gear 38T +Sealing BL-version |
|
|
|
|
|
Differential Crown Gear 38T +Sealing |
|
|
|
|
|
Differential front/rear BL-version |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Differential Outdrives front/rear |
|
|
Differential paper gasket 25.5x17.5x1.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M3x10 Flat Head Self-tapping Screw Set |
|
|
|
|
|
M3x10 Pan self-tapping Screw Set |
|
|
M3x12 Flat Head Self-tapping Screw Set |
|
|
M3x12 Pan self-tapping Screw Set |
|
|
M3x14 Pan self-tapping Screw Set |
|
|
M3x16 Pan self-tapping Screw Set |
|
|
M3x20 Flat Head Self-tapping Screw Set |
|
|
M3x20 Pan self-tapping Screw Set |
|
|
M3x6 Pan self-tapping Screw Set |
|
|
M3x8 Flat Head Self-tapping Screw Set |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slipper Clutch with CNC Main Gear |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The powerful ADB1.4 offers many advantages over its competitors. The extremely detailed body and the installed technology leave nothing to be desired!
40AHOBBYWINGspeed controller with Tamiya connector and 21T brushed motor (NiMH and LiPo compatible)
Oil pressure shock absorber with adjustable preload
LED light bar front and rear
The 40AHOBBYWINGbrushed speed controller is waterproof and comes pre-assembled with a Tamiya plug. The controller can be used with 7.2V NiMH or 2S LiPo batteries (up to 30C). Powered by this is a 21T brushed motor which directly accesses an adjustable slipper clutch. The permanent all-wheel drive provides increased traction. The two differentials (front and rear) are driven by an aluminum driveshaft.
16mm oil-pressure shock absorbers with adjustable preload on all four axles are standard on the ADB1.4 and allow you to optimize the handling and adapt it perfectly to the conditions. Adjustable shock towers made of 4mm 6061-T6 aluminum, anti-roll bars on front and rear axles and independent suspension provide amazing handling and ride.
The body with its many add-on parts such as mirrors, side pipes, fire extinguisher and pressure equalization tank is an absolute eye-catcher! In addition, there is the dashboard, two driver figures and a dummy fan at the rear.
- 4WD all-wheel drive
- 2.4GHz remote control
- Extremely durable composite plastic parts
- Fully adjustable suspension
- Ball bearing drive
- Adjustable 16mm Big Bore shocks
- Steel differential outputs
- 5mm aluminum motor mount
- 5mm aluminum shock towers
- Aluminum driveshaft
- 2 cone differentials (front/rear)
- LED light bar front and rear
- Extremely detailed body with add-on parts
- Vehicle can be powered by 2-cell LiPo batteries (up to 30C)
- Scale: 1:10
- Dimensions (L/W/H): 500x270x165 mm
- Weight: 2060g
- Wheelbase: 290mm
- Ground clearance: approx. 45mm
- Track width: 215mm front / 210mm rear
- Tires front/rearØ: 110mm / Width: 45mm
- Damper oil: 400CPS
- Damper installation length: 80mm
- Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
- Dessert Buggy "ADB1.4" Brushed Version
- 2.4GHz Remote Control CR2SV2
- Mini tool kit
- Instruction manual
1 x Battery 7.2V NIMH
1 x Charger NIMH
4 x AA Batteries for transmitter
Write your review
- Review sent
- Your comment has been submitted and will be available once approved by a moderator.
- Your review cannot be sent
feedback Report comment