Absima 1:10 EP Buggy "AB3.4-V2" 4WD RTR - AB12222V2
zoom_out_map
chevron_left chevron_right

Absima 1:10 EP Buggy "AB3.4-V2" 4WD RTR

1:10 EP Buggy "AB3.4-V2" 4WD RTR

€149.95 Tax included

€121.91 Tax excluded

check In stock
Shipped Monday.
Shipped Today.
Shipped Tomorrow.
Secure Payment
Quick Shipment
Recieve at home

Accessories and Parts:

Necessary Accessories

AA/Mignon Premium Alkaline 1.5V LR06 (4-pack)

AA/Mignon Premium Alkaline 1.5V LR06 (4-pack)

€1.95
Greenhorn NiMH Stick Pack 7.2V 3000

Greenhorn NiMH Stick Pack 7.2V 3000

€17.95
ab3.4v2.jpg 
abs12222v2_4.jpg 
The success story continues! We have equipped the AB3.4 "V2" with some new features that bring the vehicle to the next level of evolution.
12222v2_01kopie.jpg     12222v2_02kopie.jpg 
Some technical changes have been implemented in our 1/10th scale buggy - among other things, the vehicle now comes with LED lighting on the roof
 
12222v2_05.jpg 
highlights-blue-red.jpg 
  • NEW* 80A brushed speed controller withT-connector and 540 motor
  • NEW* Programmable speed controller
  • NEW* 6kg steering servo
  • NEW* LED lighting
  • NEW* Downforce rear wing
  • NEW* even more option parts available
speedsheet1-10br.jpeg 
features-blue-red.jpg 
12222v2_12.jpg 
 
The new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.
 
unknown.jpeg     unknown-1.jpeg 


The car is powered by a 540size 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity.
 
4 oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 6kg servo takes over the implementation of the steering commands.
 
12222v2_10kopie.jpg     12222v2_11kopie.jpg 
 
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
 
unknown2.jpeg     unknown3.jpeg 
  • 4WD all wheel drive
  • 2.4 GHz 4-channel radio system
  • 80A brushed speed controller with T-plug
  • 540size 15T motor with 32.000RPM @ 7.4V
  • 6kg steering servo (25T, ball bearings)
  • Oil shock absimrbers
  • Ball bearing main drive
  • Extremely durable composite plastic parts
  • Steel differential outputs
  • Aluminum main drive shaft with steel mounts
  • Adjustable upper tie rods
  • 5mm aluminum motor mount
  • 6mm shock towers
  • 2 differentials (front/rear)
  • Stylish "Cap Forward" buggy body
  • "Light-Weight" chassis (less weight - longer drive time)
  • Many aluminum option parts available
tec-spec-blue-red.jpg 
  • Scale: 1:10
  • Dimensions (L/W/H): 380x255x155 mm
  • Weight: 1400g
  • Wheelbase: 270mm
  • Ground clearance: ca. 30mm
  • Track width: 215mm front/rear
  • Front wheels: Ø 88mm / Width: 33mm
  • Rear wheels: Ø 88mm / Width: 42mm
  • Shock absorber oil: 400CPS
  • Shock absorber installation length: 90mm
  • Motor ratio: pinion: 23T / main gear: 64T (module 0,6) 
scope-of-delivery-blue-red.jpg 
12222v2_13.jpg 
  • 1/10 Buggy "AB3.4V2" RTR
  • 2.4GHz "CR4S" radio
  • Sticker sheet
  • Manual
accessories-blue-red.jpg 
  • 4x AA Batteries for radio
  • 7.2V NiMH or  7.4V* LiPo car battery
  • Charger  (suitable for car battery)
  • Programm card for individual settings of the speed controller
Absima
AB12222V2
4250650957445