Absima 1:10 EP Monster Truck "AMT3.4-V2 BL" 4WD Brushless RT - AB12244V2
zoom_out_map
chevron_left chevron_right

Absima 1:10 EP Monster Truck "AMT3.4-V2 BL" 4WD Brushless RT

1:10 EP Monster Truck "AMT3.4-V2 BL" 4WD Brushless RTR

€289.95 Tax included

€235.73 Tax excluded

block By order
Secure Payment
Quick Shipment
Recieve at home



The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.





Some technical changes have been implemented in our 1/10th scale Monster Truck - among other things, the vehicle now comes with LED lighting on the roof.







  • NEW* 60A brushless speed controller with T connector and 3421KV motor

  • NEW* Programmable speed controller

  • NEW* 15 kg steering servo with metal gear

  • NEW* LED lighting

  • NEW* Monster Truck body with many add-on parts

  • NEW* even more option parts available







The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.



The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 15kg metal gear servo handles the conversion of the steering commands.

The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.

4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.



Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.




  • 4WD all wheel drive

  • 2.4GHz 4-channel radio system

  • 60A brushless speed controller (waterproof; T plug; programmable)

  • 3421KV brushless motor (sensorless; splash-proof)

  • 15kg metal gear steering servo (25T; ball bearings)

  • 8 Aluminium oil shock absorbers

  • Ball bearing main drive

  • Extremely durable composite plastic parts

  • Steel differential outdrives

  • Aluminium main drive shaft with steel mounts

  • Adjustable upper tie rods

  • 5mm aluminium engine mount

  • 6mm shock towers

  • 2 differentials (front/rear)

  • Stylish Monster Truck body with add-on parts

  • "Light-Weight" chassis (less weight - longer driving time)

  • Many aluminum option parts available






    • Scale: 1:10

    • Dimensions (L/W/H): 425x300x200 mm

    • Weight: 2090g

    • Wheelbase: 270mm

    • Ground clearance: approx. 45mm

    • Track width: 250mm front/rear

    • Wheels front/rear: Ø 116mm / Width: 57mm

    • Shock absorber oil: 400CPS

    • Shock absorber installation length: 100mm

    • Motor ratio: 17T / main gear: 64T (module 0.6)






    • 1/10 Brushless Monster Truck "AMT3.4BLV2" RTR

    • 2.4GHz CR4S radio

    • Sticker sheet

    • Manual





    Absima
    AB12244V2
    4250650957506
    Servo Saver
    Servo Saver
    Reference: 1230191
    check In stock Shipped Monday. Shipped Today. Shipped Tomorrow.
    Servo Saver (ATC3.4 / AB3.4 / AT3.4)
    €7.95