It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles.
The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!
New EVO Features and Functions
- New* oversized 130 "Crawler Spec" brushed motor (100T)
- New* developed 2-speed steel gear shift (switchable on radio CH3)
- New extreme portal axles with steel gears for even more ground clearance
- New* motor mount (even for bigger motors like 180 & 240 size)
- New* reinforced drive shafts front & rear
- New* LCG-optimized chassis layout(Low Center of Gravity)
and also...
- 2.4GHz radio system
- Vehicle lighting operated from the transmitter (CH4)
- Oversize 1.2" AT wheels with internal beadlock system
- 1kg steering servo with panhard bar
- PPX4 water-resistant electronics
- Metal chassis frame
- Painted 1.2mm Lexan body
- Tight turning circle of 80cm
- Driving time of up to 45 minutes
- Steering angle of up to 45°
- Maximum ground clearance thanks to portal axels and 1.2" wheels
Portal axles front and rear for increased ground clearance
LED lighting front and rear. Operated via channel 4 on the transmitter
Newly developed and reinforced front and rear drive shafts
Specially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel.
Newly developed 2-speed high-performance gearbox - 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.
The motor mount is compatible with brushed and brushless motors up to a size of 240
Super-soft 1.2" "All Terrain" wheels with internal bead lock design
Simple, balanced and easily accessible "LCG" chassis layout with high-performance drivetrain
- Scale: 1:18
- 4WD all-wheel drive
- 2.4GHz radio system
- "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)
- 100T / 130size brushed motor
- Differentials fully locked (front & rear)
- Telescopic UJ cardan shafts
- Metal chassis frame
- Drag/Mountain brake (prevents rolling on hills)
- Digital proportional control for sensitive driving maneuvers
- LED lighting (CH4)
- Scale body with many attachment parts
- 1.2" bead lock wheels with super soft AT tires
- Waterproof 1kg mini steering servo
- 2-in-1 speed controller/receiver unit
- Driving time: approx. 45 minutes
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 100T - 130 oversize
Newly developed 2-speed gears
Steel drive and portal axle gears
Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 160mm
Ground clearance: 37mm
Track width: 110mm
Length: 250mm
Width: 125mm
Height: 135mm
Weight: 390g (incl. drive battery)
Wheels: 19.5x58mm
1* Mini EVO Crawler
1* 2.4GHz radio system
1* LiPo battery 7.4V 600mAh
1* USB charging cable
1* Sticker sheet
1* Manual DE/EN/FR
1* Mini tool set
4* AAA Batteries for the radio
Would you like your own design? A transparent body is available separately and under the heading "RC accessories" in our store you will also find the matching LEXAN COLORS!
Click here for the ACCESSORIES ETC.
!