Electric Motor "Thrust B-Spec" 55T + 1:10 Brushed ESC for Crawler
Electric Motor "Thrust B-Spec" 55T + 1:10 Brushed ESC for Crawler
Secure Payment
Quick Shipment
Recieve at home
Electric Motor "Thrust B-Spec" 55T + 1:10 Brushed ESC for Crawler
This set is specially designed for new beginners and intermediate modelers. It not only carries forward the outstanding quality of ABSIMA (powered by HOBBYWING) products but simplifies the operation.
FEATURES:
- Water-proof and dust-proof ESC for all weather races
- Small size with built-in capacitor module
- Multiple protections: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection / Throttle signal loss protection
- Easily programmed with “jumpers”
SPECIFICATION SPEED CONTROLLER:
- Application: Crawler & Boat
- Cont. / Burst Current - forward: 40A / 180A
- Cont. / Burst Current - reverse: 20A / 90A
- Input: 2-3S LiPo / 5-9 Cells NiMH
- Battery "Low-Power" Cut-off: NiMH 4.5V / 2S LiPo 6.5V / 3S LiPo 9.75V
- Motor Limit 2S LiPo/5-6 Cells NiMH: 540 or 550 Motor =12T or RPM <30.000 @ 7.2V
- Motor Limit 3S LiPo/7-9 Cells NiMH: 540 or 550 Motor =18T or RPM <20.000 @ 7.2V
- Maximum Reverse Force: Boat 25% / Crawler: 100%
- Overheat Protection: 100°
- Resistance: Fwd: 0.002 Ohm, Bwd: 0.004 Ohm
- Built-in BEC: 2A/6V (Linear Mode BEC)
- Plug System: Tamiya
- Plug & Drive System: yes
- On/Off Switch: yes
- Dimmension (L/W/H): 46.5*34.0*28*5 mm
- Weight: 70g
SPECIFICATION MOTOR:
- Turns: 55x2T
- RPM: 7.700
- Continuous Current: 85W
- Operation V: 7.2V-7.4V
- Motor size: 540
- Shaft length: 12,3mm
- Shaft Ø: 3,19mm
- Motor length: 53,2mm
- Motor Ø: 35,7mm
- Brushess & Springs changeable: yes
SCOPE OF DELIVERY:
- WP1040 Brushed Crawler & Boat ESC
- 50T Electric Motor
- Manual
feedback Report comment