Quicrun ESC WP-1060 brushed 60A 1/10

Quicrun ESC WP-1060 brushed 60A 1/10

HW30120201

 

Easy Operation
This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation.

Applicable to All Weather Conditions
The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.

High Reliability & Durability
Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit.

Easy to Use
This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners.

Wide Application
This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks.

• Waterproof
• Cont./Peak Current - 60A/360A
• Input - 2-3S LiPo/6-9 Cells NiMH
• BEC Output - Switch Mode:6V/3A
• Motor Limit - 2S Lipo or 6 NiMH - 540 or 550 Size Motor: 12T or RPM 30000 - 7.2V
• 3S Lipo or 9 NiMH - 540 or 550 Size Motor: 18T or RPM 20000 - 7.2V
• Input Wires - Red-16AWG-100mm/Black-16AWG-100mm
• Output Wires - Blue-16AWG-100mm/Yellow-16AWG-100mm
• Input Connectors - Big-sized TAMIYA Connector
• Output Connectors - 4.0 Bullet Connectors (Female)
• Size - 36.5x32.0x18.0mm
• Weight - 39g
• Motors - Brushed Motors

Suitable for: 1/10 Touring Car, Buggy, Short Course, Truck, Monster, Truggy, Rock Crawler and Tank.

Installation & Connection

Turn off the ESC switch, wire the battery, motor, ESC, servo, receiver according to the following diagram. Recheck the wiring to ensure all connections are correct before getting into the next step.
1) Once the power is wrongly connected (that means the battery polarity is mistakenly reversed ), irreparable damage may occur to the ESC and batteries. Therefore, please pay close attention to the battery polarity.
2) Please swap the two wire connections if the motor rotate in the opposite direction.