1:10 EP Crawler CR3.4eco SHERPA gun-met. RTR
1:10 EP Crawler CR3.4eco SHERPA gun-met. RTR
Acessórios e Peças:
Acessórios Necessários
|
LiPo Stick Pack 7.4V-50C 4000 Hardcase (T-Plug) |
|
|
LiPo Stick Pack 7.4V-50C 5000 Hardcase (T-Plug) |
|
|
Power Tank Lipo 7,4V.-60C 7100 Hardcase (T-Plug) |
|
|
Power Tank Lipo 7.4V.-60C 6200 Hardcase (T-Plug) |
|
|
HPI PLAZMA 7.4V 3200MAH 30C LIPO HARD CASE STICK PACK 23.68H |
|
|
HPI PLAZMA 7.4V 5300MAH 40C LIPO HARD CASE STICK PACK 39.22 |
|
|
HPI PLAZMA 11.1V 3200MAH 40C LIPO HARD CASE STICK PACK 35.52 |
|
|
Greenhorn Vol.2 LOW PROFILE LiPo 11.1V-40C 4000 HC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AA/Mignon Premium Alkaline 1.5V LR06 (4-pack) |
|
|
HPI PLAZMA 1.5V ALKALINE AA BATTERY |
Combinações Perfeitas
The quality of the installed parts is of course the same as its fully equipped brothers. The mounting points for special equipment such as the differential locks or 2-speed gearbox would theoretically also be available.
The steering shock absorber absorbs most hard impacts so that the 9kg MG steering servo and the servo arm are spared. Hardened steel drive shafts and a steering angle of 45.8° offer the best possibilities for every terrain. Added to this are the 2.2" tyres, which not only look stylish, but also offer extremely good Grip thanks to the super-soft tyres.
Our 4-channel, 2.4 GHz CR4S-V2 radio control system completes the package.
- 2.4GHz 4-channel remote control CR4S-V2
- 9kg steering servo with metal gears
- 40A Hobbywing speed controller (3S LiPo capable) with T-connector
- 32T 550 brushed motor
- Portal axles
- Aluminium 4-link suspension
- Steel drive shafts front and rear
- Heavy duty cardan shafts front and rear
- Steering angle max: 45.8°
- Rims: 2.2" with 12mm hexagon mount
- Tyres: Supersoft 40x115mm
- Shock absorber length: 90mm
- Viscosity of damper oil: 500cps
- Gearbox: Module 0.8/32dp; pinion18T / main gear44T
- Approach angle: 60°
- Departure angle: 45°
- Length: 542mm
- Width: 250mm
- Height: 240mm
- Ground clearance: 53mm
- Wheelbase: 313mm
- Weight: 2390g
- CR3.4eco crawler including remote control
- operating instructions
- Sticker sheet
- 7.2V NiMH battery, 2S/7.4V LiPo battery or 3S/11.1V LiPo battery .
- Charger suitable for the battery type.
- 4 AA Mignon batteries or TX LiPo battery for the remote control.
You can find a selection of suitable parts on this page under "Spare parts and accessories"
feedback Denunciar comentário